Your cartThere are no more items in your cart
Special paint for hive, 1 kg (different colours)
€18.54 €20.60 -10%
Special paint for hive, 1 kg. Available colours: blue, White, green and yellow ochre.
Customers who bought this product also bought:
Open mesh floor for varroa control for 10 frames hive: wood, mesh and tray. The snap-hooks to connect the floor with the brood nest and the relevant screws are not included. dimensions: 43,5x60x6,8 cm; wood thickness is 2.5 cm; of the net (that is, actually a perforated sheet with very close holes) is 38,5x44 cm; the dimensions of the galvanized sheet...
10 other products in the same category:
Plastic honeycomb honeycomb honeycomb. Each series consists of 5 faves and fits into a D.B. The honeycomb also includes a transparent case which is used to definitively package honey in a comb. It is sold in packs of 10 pieces (total 50 faves).
Distanziatore dentanto per 10 favi (mm. 448). Serve a distribuire con maggiore precisione e velocità i telai nell'arnia. Può essere applicato ad un arnia 50x50.
Wooden stick to be fitted in the holding frame, with a special groove to insert cups. The stick is 41.6 cm long. The groove is 9 mm wide and 5 mm deep.
Plastic grille for pollen. A line of 9 holes with a moulded board at the base to help forager bees get in. The grille can be divided in two lengthwise to create 2 pollen traps. Dimensions: 4 mm hole diameter, 100 mm height, 395 mm length, 12 mm thickness.
Rotating disk with 4 positions for crown boards. The positions are: closed, open, aeration, queen excluder. In the "open" position, it allows inserting the cylindrical or square feeder. The total diameter is 125 mm. The diameter of the hole is 45 mm.
Pollen production and Propolis
This pollen trap can be installed outside the beehive. The 45 mm hole on the rear side should match a hole of the same size on the hive. This multi-layer trap includes a structure with opening roof, grille/trap for the passage of bees, plastic collection drawer and two lateral holes to help bees go out.
Entrance reducer, 380 mm, with holes and indented, no runners, for 10 frames hives. The part with holes must be used during the movements of colonies and allows hive ventilation.
Toothed spacer for 10 combs (383 mm). Useful to place the frames into the hive in a more precise and quick way. Suitable for a 43x50 hive.
Metal corner joint for hive to connect the brood nest and the super. It is advisable to use 3 joints for each hive, two in the front and one in the back of the hive brood nest. The fourth corner (free) is used to allow the insertion of the hive tool when it is necessary to raise the crown board (or the super). A tool-rest joint may be inserted in the...