Accessories Frame spacer for 12 frames, 448 mm €0.40 Toothed frame spacer for 12 frames (448 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 50x50 hives. The 12-frame spacer is a standard for 12 frame hive brood nests. Add to basket
Accessories Bottom frame-holding spacer €6.10 Bottom spacer 383x10x25 made of sturdy galvanised metal sheet. It can be fitted on the bottom of the beehive, under the combs to prevent them from swinging during transportation. Add to basket
Accessories Frame spacer for 11 frames, 448 mm €0.40 Toothed frame spacer for 11 frames (448 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 50x50 hives. The 11-frame spacer is a standard for 12 frame hive supers. Add to basket
-10% Accessories Queen excluder, metal wire, 50x50 with frame €19.53 €21.70 Queen excluder, metal wire, 50x50 with frame. It allows preventing the queen from entering the super and laying eggs. It allows having always clean super frames and makes them also less attractive for wax moths which are attracted by the brood smell. The frame allows for better adherence between the brood nest, the queen excluder and the super. Add to basket
Accessories 12 frames mesh/perforated metal floor (44,5x45,5 cm) €4.50 Perforated metal floor for varroa control. It allows varroa falling during treatment. Unlike the mesh, the sheet metal causes less trouble to bees that walk on it and tends to be less propolised. Add to basket
Accessories Pre-folded sheet for 12 frame hives €12.50 Pre-folded sheet for 12 frame hive roofs (545x545x107 mm). The wooden frame is not included. Add to basket
Accessories Galvanized iron frame spacer, 383 - 8 - 25 €0.35 Sheet metal frame spacer for 8 frames (383 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 43x50 hives. Add to basket
-10% Accessories Galvanized angle screws, 21x40 €0.45 €0.50 Galvanized angle screws to fasten carrying masks. Hives provided by us are not equipped with carrying masks and angle screws. Two angle screws are necessary for each hive. Add to basket
-10% Accessories Round-hole plastic grille for pollen, with board (3-hole series) €4.05 €4.50 Plastic grille for pollen. A line of 3 holes with a moulded board at the base to help forager bees get in. Dimentions: mm. 360x30x12 Add to basket
Beehives Brood frame with wax €4.20 Nest frame with knurled wire and mounted wax sheet. PURCHASING IS NOT RECOMMENDED IN COLD PERIODS BECAUSE THE WAX BECOMES FRAGILE THEREFORE SUBJECT TO BREAKAGE. IN CASE OF DAMAGE DURING SHIPPING WE ARE NOT ABLE TO REFUND. Add to basket
Accessories Frame spacer for 11 frames, 448 mm €0.40 Toothed frame spacer for 11 frames (448 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 50x50 hives. The 11-frame spacer is a standard for 12 frame hive supers. Add to basket
-10% Beehives Migration 10-comb anti-varroa beehive. Nest only. €87.30 €97.00 Beehive with removable anti-varroa base (fixed with screws, unlike the one in the picture), nest, comb cover, metal sheet cover and accessories. The super-hive and the nest and hive frames shown in the picture are not included. Add to basket
-10% Equipment for the apiary Reinforced latex gloves, "Parazigrinati", long sleeve €11.70 €13.00 Thick latex gloves, reinforced. Rolled edge with drop. Available sizes 9-10-11. Length cm. 35The CE marking indicates that these gloves are personal protective equipment that comply with the essential health and safety requirements contained in Regulation (EU) 2016/425 and that they have been certified by the notified body: RICOTEST SRL, Via Tione, 9,... Add to basket
Accessories Plastic 10-comb transportation grille €5.50 Plastic transportation grille to be fitted on the front of the migration hive, between the bottom and the porch, very useful during transportation. Add to basket
-10% Beehives Roof for beehive, 12 frames €20.70 €23.00 Roof for 12 frames beehive, with galvanised metal cover. Internal dimensions: 52x51.5x8.5cm. Add to basket
Accessories Frame spacer for 12 frames, 448 mm €0.40 Toothed frame spacer for 12 frames (448 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 50x50 hives. The 12-frame spacer is a standard for 12 frame hive brood nests. Add to basket
-15% Equipment for the apiary Smoker "America", stainless steel, 10 cm €33.32 €39.20 Stainless steel smoker "America", 10 cm diameter, 30 cm high. Suitable for long lasting work in the apiary. Equipped with heat shield. Add to basket
-20% Equipment for the apiary Vegetable fuel for the Smoker (kg 1) €5.20 €6.50 Fuel for the Smoker 1 kg pack. Of exclusively vegetable origin, from pine and fir wood, it guarantees the functionality of the smoker for a long time with slow and abundant combustion. Usage: Ignite double-wave cardboard in the smoker. When this is well lit and fuming, add a spoonful of Product, enough to keep it on and functioning for more than a few... Add to basket
Accessories Notched door only (summer/winter) for 10-comb beehive (with guides) €1.40 Door with gate valve toothed on both sides with winter/summer position, mm. 380 with guides, for hive of 10 honeycombs. Add to basket