Accessories Metal corner for hive €0.20 Metal corner joint for hive to connect the brood nest and the super. It is advisable to use 3 joints for each hive, two in the front and one in the back of the hive brood nest. The fourth corner (free) is used to allow the insertion of the hive tool when it is necessary to raise the crown board (or the super). A tool-rest joint may be inserted in the... Add to basket
-10% Accessories Metal sheet protection spacer for polystyrene box €2.61 €2.90 It is suitable for the polystyrene box with external feeder only. Add to basket
-10% Accessories Grille queen excluder 43x50 €8.82 €9.80 Drawn and galvanised steel grille queen excluder 43x50 (for 10-comb hives). The queen is prevented from reaching the super-hive and lay eggs. This allows keeping the super-hive combs clean and makes them less attractive for the wax moth, which is attracted by the smell of brood. Excellent galvanizing and finishing. The sticks are not welded, but inserted... Add to basket
Accessories Bottom net or perforated metal sheet for 10 combs (385x445 mm). €4.00 Perforated sheet for antivarroa bottom. It allows the varroa to fall at the time of treatment. Technical features: galvanized, drilled diam 4 mm alternating at 60%, pitch / center distance 5 mm - jagged edges - 385x445 mm x 6/8 tenths Add to basket
Accessories Plastic 10-comb transportation grille €5.50 Plastic transportation grille to be fitted on the front of the migration hive, between the bottom and the porch, very useful during transportation. Add to basket
Accessories Plastic 12-comb transportation grille €5.50 Plastic transportation grille to be fitted on the front of the migration hive, between the bottom and the porch, very useful during transportation. Dimensions: 46.5x23 Add to basket
-10% Accessories 35.5 x 45.5 cm wide metal sheet drawer (movable base for 10 combs) €4.14 €4.60 Galvanised metal sheet drawer to be fitted in the anti-varroa bottom to collect varroa mites during treatments. Add to basket
-10% Accessories 46 cm wide metal sheet drawer (movable base for 12 combs) €4.41 €4.90 Galvanised metal sheet drawer to be fitted in the anti-varroa bottom to collect varroa mites during treatments. Add to basket
Accessories Bottom frame-holding spacer €6.10 Bottom spacer 383x10x25 made of sturdy galvanised metal sheet. It can be fitted on the bottom of the beehive, under the combs to prevent them from swinging during transportation. Add to basket
-10% Accessories Frame-holding shelf €18.00 €20.00 Stainless steel shelf to support the nest frames during operations on the beehive. This shelf can be hooked outside the hive wall to hold the first combs that are removed to allow more free space inside the hive. Add to basket
-10% Accessories Sheet metal drawer/tray cm. 38,5 X 46,5 c/a (for mobile bottom of 10 honeycombs) €4.14 €4.60 Galvanized sheet metal tray for the anti-varroa floor to collect varroa mites during treatments. Add to basket
Accessories 9 mm Mussi type spacer mm 383 €1.00 Toothed galvanized frame spacer, 9 frames, 383 mm, Mussi type. A particular frame spacer that, according to many people, contributes to reduce hive varroa infestation. For further information, please consult the product Internet site. http://www.federapi.biz/index.php?option=com_content&task=view&id=166&Itemid=184 Add to basket
-10% Accessories Sheet metal tray, width 42 cm (with removable 12 frames bottom) €4.41 €4.90 Galvanized sheet metal tray for the anti-varroa bottom to collect varroa mites during treatments. Add to basket
-10% Accessories Wooden partition frame €6.30 €7.00 The headboard is made of wood and the panel is in plywood. Same size as a Dadant Blatt frame. It is used to reduce the internal width of the hive when there is a family smaller than the number of combs in the hive, or to divide two families present in the same hive. Dimensions: 45/47 x 32cm. Add to basket
Accessories Snap-hoof for floor €0.80 Snap-hook for fixing hive movable parts. Three screws are necessary for each hook (not included). Add to basket
Accessories Pre-folded sheet for 10 frame hives €9.10 Pre-folded sheet for standard hive roofs (475x545x107 mm). The wooden frame is not included. Add to basket
Accessories Pre-folded sheet for 12 frame hives €12.50 Pre-folded sheet for 12 frame hive roofs (545x545x107 mm). The wooden frame is not included. Add to basket
Accessories Cap for crown board hole, 45 mm €0.30 Plastic cap for crown board, diam. 45 mm Add to basket
-10% Accessories Impregnating paint/finish, 1 kg €15.75 €17.50 Water-based impregnating paint, 1 kg. Wood colours available with shades: brown, yellow, green, red and orange. Add to basket
-10% Accessories Special paint for hive, 1 kg (different colours) €23.40 €26.00 Special paint for hive, 1 kg. Available colours: blue, White, green and yellow ochre. Add to basket
-10% Accessories Galvanized angle screws, 21x40 €0.45 €0.50 Galvanized angle screws to fasten carrying masks. Hives provided by us are not equipped with carrying masks and angle screws. Two angle screws are necessary for each hive. Add to basket
Accessories Hive handle €1.60 Handle for hive complete with galvanized steel plate (screws are not included). It is a trunk type handle. Add to basket
Accessories Backing for hive tool €0.65 Metal backing for hive tool to prevent damage to the part of the hive where the hive tool is inserted. To be placed on the side free from "simple" corners. Add to basket
Accessories Perforated and toothed door for 10-comb beehive (with guides) €1.40 Toothed and perforated gate valve mm. 380, with guides, for hive of 10 honeycombs. The perforated part is used during family travel and allows the aeration of the hive. Add to basket
Accessories Notched door only, summer/winter for 12-comb beehive (with guides) €1.40 Gate with toothed gate on both sides, winter/summer position, mm. 445, with guides, for hive of 12 frames. Add to basket
Accessories Notched door only (summer/winter) for 10-comb beehive (with guides) €1.40 Door with gate valve toothed on both sides with winter/summer position, mm. 380 with guides, for hive of 10 honeycombs. Add to basket
Accessories Perforated and toothed door for 12-comb hive (with guides) €1.40 Toothed and perforated door mm. 445, with guides, for hive of 12 frames. The perforated part is used during family travel and allows the aeration of the hive. Add to basket
Accessories 12 frames mesh/perforated metal floor (44,5x45,5 cm) €4.50 Perforated metal floor for varroa control. It allows varroa falling during treatment. Unlike the mesh, the sheet metal causes less trouble to bees that walk on it and tends to be less propolised. Add to basket
-10% Accessories Queen excluder, metal wire, 50x50 with frame €19.53 €21.70 Queen excluder, metal wire, 50x50 with frame. It allows preventing the queen from entering the super and laying eggs. It allows having always clean super frames and makes them also less attractive for wax moths which are attracted by the brood smell. The frame allows for better adherence between the brood nest, the queen excluder and the super. Add to basket
-10% Accessories 50x50 queen excluder with drawn and galvanized steel grid €11.07 €12.30 Metal wire queen excluder, 5x50 cm (for 12 frames hives), made of drawn and galvanized steel. It allows preventing the queen from entering the super and laying eggs. It allows having always clean super frames and makes them also less attractive for wax moths which are attracted by the brood smell. Add to basket
-10% Accessories Queen excluder, metal wire, 43x50 with Wood frame €17.37 €19.30 Metal wire queen excluder, 43x50 cm, with drawn and galvanized steel frame. It allows preventing the queen from entering the super and laying eggs. It allows having always clean super frames and makes them also less attractive for wax moths which are attracted by the brood smell. The frame allows for better adherence between the brood nest, the queen... Add to basket
-10% Accessories Queen Excluder, plastic wire 420x506, Langstroth/Dadant €3.33 €3.70 Queen excluder, plastic wire, cm 42x50,6 (for 10 frames hive) Model Europa, special plastic for food. Thinner compared to metal ones and, therefore, easier to be carried and installed in hives. Very precise and smooth spaces that do not damage passing bees. Add to basket
Accessories Frame spacer for 12 frames, 448 mm €0.35 Toothed frame spacer for 12 frames (448 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 50x50 hives. The 12-frame spacer is a standard for 12 frame hive brood nests. Add to basket
Accessories Frame spacer for 11 frames, 448 mm €0.35 Toothed frame spacer for 11 frames (448 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 50x50 hives. The 11-frame spacer is a standard for 12 frame hive supers. Add to basket
Accessories Spacer 10 honeycombs mm 448 €1.00 Tooth spacer for 10 honeycombs (448 mm). It serves to distribute the frames in the hive with greater precision and speed. It can be applied to a 50x50 hive. Add to basket
Accessories Frame spacer for 9 frames, 383 mm €0.30 Sheet metal frame spacer for 9 frames. It is used to distribute frames in the hive more accurately and quickly. It can be used on 43x50 hives. The 9-frame spacer is a standard for 10 frame hive supers. Add to basket
Accessories Galvanized iron frame spacer, 383 - 8 - 25 €9.35 Sheet metal frame spacer for 8 frames (383 mm). It is used to distribute frames in the hive more accurately and quickly. It can be used on 43x50 hives. Add to basket
Accessories Rotating disk, four positions €1.00 Rotating disk with 4 positions for crown boards. The positions are: closed, open, aeration, queen excluder. In the "open" position, it allows inserting the cylindrical or square feeder. The total diameter is 125 mm. The diameter of the hole is 45 mm. Add to basket
Accessories Protection for 12 frame hives €4.80 Sheet metal protection for 12 frame hives. It is used to protect the hive porch from the bad weather. The protection is used for "migration" hives only, i.e. those provided with a porch. Add to basket
Accessories Dadant 10 honeycomb hive mask cover 435 mm €4.00 Sheet metal protection for 10 frame hives. It is used to protect the hive porch from the bad weather. The protection is used for "migration" hives only, i.e. those provided with a porch. Add to basket
-10% Accessories Galvanized nails for hives, 16x60, 1 kg. €9.00 €10.00 Galvanized nails, 16x60 (per kg). Suitable to nail hives. Add to basket
-10% Accessories Metal eyelets (1,000 pieces) €25.11 €27.90 Metal eyelets, 3 mm diameter, 5 mm long for strengthening the holes in the wooden frame (approx. 1, 000 pieces) Add to basket
Beehives Plastic numbers, 15/21 series €2.25 Plastic numbers, to number the hives, series of 15/21 digits. Dimensions (approx.): 12/15 mm wide and 27 mm high. The color can vary from yellow to orange. Add to basket
-15% Beehives Glass observation super-hive 43x50 for 10-comb hive €90.10 €106.00 Glass and wood observation super-hive. It can be opened on all sides. Suitable both for observation hives and regular hives. Frequently used for learning purposes. Add to basket
-20% Beehives Galvanised wire coil, approx. 14 kg. €96.00 €120.00 Galvanised wire coil, approx. 14 kg. Thickness 0.45 mm Add to basket
Pollen production and Propolis External pollen collection trap for 10-comb permanent hive €48.00 This is a pollen trap to be placed outside the hive. Made entirely of plywood, it is composed of a structure with an opening roof, a grill/trap for the passage of bees, a drawer with stainless steel mesh and two side holes to facilitate the escape of bees. Add to basket
Pollen production and Propolis Small external pollen collection trap €41.00 This is a pollen trap, about 25 centimeters wide, to be placed outside the swarm holder (small hive) Add to basket
-15% Beehives Hot brand for beehives €242.25 €285.00 Hot brand for beehives with gas burner and hose (without pressure regulator and type). Add to basket
-15% Beehives Type for brand (letters or digits) €28.48 €33.50 Supplementary type for brand (letters or digits) Specify what letter or digit you need, e.g. “A”, “B” or “1”, etc. (The price refers to the specific item) Add to basket
Accessories 383 mm spacer for 10 combs €0.30 Toothed spacer for 10 combs (383 mm). Useful to place the frames into the hive in a more precise and quick way. Suitable for a 43x50 hive. Add to basket
Beehives Crown board, 43x50 €12.50 43x50 raised rim crown board for 10 frame hives. With a 45 mm diam. feeder hole and a plastic lid. Add to basket
Beehives Punched metal sheet lid for hives €9.90 Sturdy punched galvanised metal sheet lid suitable for 5 and 6-frame hives. Dimensions: About 29x51x11 cm Add to basket
Beehives Metal sheet profile for the protection of polystyrene boxes €1.35 Galvanised metal sheet profile to protect the edges of polystyrene boxes. Dimensions: 470X20x20, suitable for polystyrene boxes WITH feeder. Add to basket
Accessories Round-hole plastic grille for pollen, with board €8.50 Plastic grille for pollen. A line of 9 holes with a moulded board at the base to help forager bees get in. The grille can be divided in two lengthwise to create 2 pollen traps. Dimensions: 4 mm hole diameter, 100 mm height, 395 mm length, 10 mm thickness. Add to basket
Beehives Brood frame with wax €4.20 Nest frame with knurled wire and mounted wax sheet. PURCHASING IS NOT RECOMMENDED IN COLD PERIODS BECAUSE THE WAX BECOMES FRAGILE THEREFORE SUBJECT TO BREAKAGE. IN CASE OF DAMAGE DURING SHIPPING WE ARE NOT ABLE TO REFUND. Add to basket
-10% Beehives Super frame with wax €2.66 €2.95 Super frame with knurled wire and assembled wax sheet. PURCHASING IS NOT RECOMMENDED IN COLD PERIODS BECAUSE THE WAX BECOMES FRAGILE THEREFORE SUBJECT TO BREAKAGE. IN CASE OF DAMAGE DURING SHIPPING WE ARE NOT ABLE TO REFUND. Add to basket
Accessories Cup-holding wooden stick with groove €1.10 Wooden stick to be fitted in the holding frame, with a special groove to insert cups. The groove is 9 mm wide and 5 mm deep. Add to basket
-15% Accessories Queen Excluder 27 x 49 with grid for hive of 6 honeycombs €8.42 €9.90 Grid queen excluder cm. 27x49 (for 6 honeycombs hive) in drawn and galvanized steel. It is used to prevent the queen from going to the super and laying eggs. This allows to always have clean honeycombs and also makes them less attractive to the wax moth which is attracted by the smell of the brood. The sticks are not welded, but threaded and very tight in... Add to basket
-10% Accessories Round-hole plastic grille for pollen, with board (3-hole series) €4.05 €4.50 Plastic grille for pollen. A line of 3 holes with a moulded board at the base to help forager bees get in. Dimentions: mm. 360x30x12 Add to basket
Accessories Rotating plastic disc €2.10 Three-position plastic disc that can be used as a door for queen fertilization nuclei or for small hives. It has three positions: exclude queen, ventilation and door. The diameter is 8 centimeters. Add to basket
-10% Accessories Grid Exclude queen cm 50x50 for beehive of 12 honeycombs Dadant in plastic €7.65 €8.50 Queen excluder, plastic wire, cm 50x50 (for 12 frames hive) Model Europa, special plastic for food. Thinner compared to metal ones and, therefore, easier to be carried and installed in hives. Very precise and smooth spaces that do not damage passing bees. Add to basket
Accessories Bottom frame-holding spacer 12 frames €7.00 Spacer mm 448, for 12 tel beehive, from the bottom, made of sturdy galvanized sheet. It is fixed at the bottom of the hive under the honeycombs of the nest and prevents their oscillation during nomadism. Add to basket
Accessories spacer for 6 combs 233 mm €0.30 Toothed spacer for 6 combs (233 mm). Useful to place the frames into the hive in a more precise and quick way. Add to basket
Accessories Cap for crown board hole, 42 mm €0.30 Plastic cap for crown board, diam. 42 mm Add to basket
-10% Accessories Exclude queen about 27x50 cm, plastic, for 6 honeycomb harnesses €4.23 €4.70 Queen excluder cm. About 27x50 (for 6 frames) in plastic. Europa model, special plastic for food. Very precise and smooth spaces that do not harm the bees during the passage. Add to basket
-10% Accessories Galvanized nails for frames, 11x35, 1 kg €17.10 €19.00 Galvanized nails, 11x35. Suitable to nail frames. Add to basket
-10% Equipment for the apiary Round plastic bee escape, 8 exits, 43X50 cm board €13.95 €15.50 Round plastic bee escape, 8 exits, assembled on a 43x50 cm board Add to basket
Beehives Spotted sheet metal lid for 7 frame DB beehive €12.00 Sturdy punched galvanised metal sheet lid suitable for 5 and 6-frame hives. Dimensions: About 29x51x11 cm Add to basket
Beehives Spotted sheet metal lid for 7 frame DB beehive €12.50 Sturdy punched galvanised metal sheet lid suitable for 5 and 6-frame hives. Dimensions: About 29x51x11 cm Add to basket
-10% Accessories Grid Exclude queen cm 43x50 for beehive of 10 honeycombs Dadant in plastic €4.14 €4.60 Queen excluder, plastic wire, cm 43x50 (for 10 frames hive) Model Europa, special plastic for food. Thinner compared to metal ones and, therefore, easier to be carried and installed in hives. Very precise and smooth spaces that do not damage passing bees. Add to basket